Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-B821-15-D
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Input Diameter (in):||0.625 in||Overhung Load:||1,125|
|Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Output HP:||1.661|
|Input HP:||1.887||Reducer:||Worm - Right Angle|
|Gear Type:||Worm||Center distance (inch):||2.06|
|Model Code:||B821||Input Style:||Shaft|
|No. of Gear Reductions:||Single||Output shaft:||Shaft|
|Reducer Style:||Worm - Right Angle||Housing material:||Cast Iron|
|Input RPM:||1,750||Gear Drive Reductions:||Single|
|Service Factor:||1||Output Style:||D|
|Input Keyway:||3/16 X 1.38||Output Torque:||897|
|Mounting Style:||Base||Shaft Seal Material:||Viton|
|Output RPM:||116||Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Product Type:||Right Angle||Output Shaft Assembly Code:||D|
|Series Style:||NH-B-D||Output Shaft Orientation:||D|
|Ratio Range:||15:1||Output Diameter (in):||0.875 in|
|Output Key:||3/16 X 1.50|