Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-BMQ813-20-R-48

Catalog #:NH-BMQ813-20-R-48
Part #:NH8130197.00
  • Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
  • Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
  • Large oil capacity provides positive splash lubrication and superior cooling capability.
  • Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
  • O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
  • Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
  • The unique quill seal guard protects the input seal from damage during motor installation.
  • Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
  • All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
  • Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
Weight:14 LB
UOM:EA
List Price: $638.00

General Specifications

UPC: 69031005684 Weight: 14 LB

Technical Specifications

Input HP: 0.551 Output RPM: 87
Model Code: BMQ813 Assembly: BMQ-R
Overhung Load: 700 Output Torque: 320
Ratio: 20:1 Input Keyway (C Face): 1/8 x 1/16
Output Key: 3/16 x 1.50 Reducer: Worm - Right Angle
Gear Type: Worm Input Bore (C Face): 0.5
Product Type: Right Angle Housing material: Cast Iron
No. of Gear Reductions: Single Series Style: NH-BMQ-R
Frame Size: 48 Output Shaft Assembly Code: R
Mounting Style: Base Output shaft: Shaft
Center distance (inch): 1.33 Product Line: NH Series - Ironman Narrow Housing Worm Gear Reducers
Input Style: C-face Quill Ratio Range: 20:1
Gear Drive Reductions: Single Input RPM: 1,750
Output Diameter (in): 0.750 in Output Style: R
Reducer Style: Worm - Right Angle Input Diameter (in): 0.5 in
Service Factor: 1 Shaft Seal Material: Viton
Output Shaft Orientation: R Series: NH Series - Ironman Narrow Housing Worm Gear Reducers
Output HP: 0.445
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.