Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-BMQ813-40-D-56
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Ratio Range:||40:1||Output Torque:||322|
|Housing material:||Cast Iron||Output Key:||3/16 x 1.50|
|Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Gear Type:||Worm||Output Shaft Assembly Code:||D|
|Output shaft:||Shaft||Output HP:||0.223|
|Service Factor:||1||No. of Gear Reductions:||Single|
|Model Code:||BMQ813||Output RPM:||43|
|Mounting Style:||Base||Product Type:||Right Angle|
|Input HP:||0.329||Reducer:||Worm - Right Angle|
|Frame Size:||56||Output Shaft Orientation:||D|
|Input RPM:||1,750||Input Keyway (C Face):||3/16 x 3/32|
|Shaft Seal Material:||Viton||Reducer Style:||Worm - Right Angle|
|Input Diameter (in):||0.625 in||Input Bore (C Face):||0.625|
|Overhung Load:||700||Gear Drive Reductions:||Single|
|Output Diameter (in):||0.750 in||Center distance (inch):||1.33|
|Input Style:||C-face Quill|