Grove Gear Cast Iron Single-Reduction Worm Reducer - GRL-BMQ832-100-R-140
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Gear Drive Reductions:||Single||Service Factor:||1|
|Output HP:||0.435||Overhung Load:||2,275|
|Input RPM:||1,750||Input Bore (C Face):||0.875|
|Series:||GR Series - Ironman Worm Gear Reducers||Output Key:||5/16 x 2.63|
|Output Torque:||1567||Reducer Style:||Worm - Right Angle|
|Model Code:||BMQ832||Frame Size:||140|
|Output Diameter (in):||1.375 in||Assembly:||BMQ-R|
|Input Keyway (C Face):||3/16 x 3/32||Ratio:||100:1|
|Output RPM:||17||Gear Type:||Worm|
|Series Style:||GRL-BMQ-R||Center distance (inch):||3.25|
|Output Style:||R||Reducer:||Worm - Right Angle|
|No. of Gear Reductions:||Single||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Output Shaft Assembly Code:||R||Input HP:||0.691|
|Input Style:||C-face Quill||Output Shaft Orientation:||R|
|Input Diameter (in):||0.875 in||Housing material:||Cast Iron|
|Product Type:||Right Angle||Ratio Range:||100:1 to 250:1|
|Mounting Style:||Base||Shaft Seal Material:||Viton|