Grove Gear Cast Iron Single-Reduction Worm Reducer - GRL-BM832-10-R-210
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input RPM:||1,750||Series:||GR Series - Ironman Worm Gear Reducers|
|Service Factor:||1||Output Diameter (in):||1.375 in|
|Output RPM:||175||Gear Type:||Worm|
|Series Style:||GRL-BM-R||Frame Size:||210|
|Shaft Seal Material:||Viton||Reducer:||Worm - Right Angle|
|Input Keyway (C Face):||5/16 x 5/32||Output Shaft Orientation:||R|
|Input Bore (C Face):||1.375||Output HP:||7.497|
|Input HP:||8.092||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Gear Drive Reductions:||Single||Input Style:||C-Face Coupled|
|Output Shaft Assembly Code:||R||Model Code:||BM832|
|Mounting Style:||Base||Overhung Load:||2,170|
|Output Style:||R||No. of Gear Reductions:||Single|
|Reducer Style:||Worm - Right Angle||Ratio Range:||10:1|
|Assembly:||BM-R||Product Type:||Right Angle|
|Ratio:||10:1||Center distance (inch):||3.25|
|Output shaft:||Shaft||Input Diameter (in):||1.375 in|
|Output Torque:||2700||Output Key:||5/16 x 2.63|
|Housing material:||Cast Iron|