Grove Gear Cast Iron Single-Reduction Worm Reducer - GRL-BM832-30-L-210
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Key:||5/16 x 2.63||Service Factor:||1|
|Output Shaft Assembly Code:||L||Reducer:||Worm - Right Angle|
|Product Type:||Right Angle||No. of Gear Reductions:||Single|
|Mounting Style:||Base||Series Style:||GRL-BM-L|
|Center distance (inch):||3.25||Input HP:||3.619|
|Ratio Range:||30:1||Reducer Style:||Worm - Right Angle|
|Input Keyway (C Face):||5/16 x 5/32||Gear Drive Reductions:||Single|
|Assembly:||BM-L||Housing material:||Cast Iron|
|Output RPM:||58||Overhung Load:||2,275|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Model Code:||BM832|
|Input Bore (C Face):||1.375||Ratio:||30:1|
|Output Torque:||3226||Gear Type:||Worm|
|Output Shaft Orientation:||L||Shaft Seal Material:||Viton|
|Input Style:||C-Face Coupled||Input RPM:||1,750|
|Output HP:||2.986||Output shaft:||Shaft|
|Output Diameter (in):||1.375 in||Input Diameter (in):||1.375 in|
|Series:||GR Series - Ironman Worm Gear Reducers||Output Style:||L|