Grove Gear Cast Iron Single-Reduction Worm Reducer - GRL-BM832-60-L-140
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Diameter (in):||1.375 in||Input Style:||C-Face Coupled|
|Output Style:||L||Gear Type:||Worm|
|Output Shaft Orientation:||L||Assembly:||BM-L|
|Reducer Style:||Worm - Right Angle||Ratio Range:||60:1|
|Series Style:||GRL-BM-L||Output HP:||1.515|
|Reducer:||Worm - Right Angle||Series:||GR Series - Ironman Worm Gear Reducers|
|Overhung Load:||2,275||Output Key:||5/16 x 2.63|
|Service Factor:||1||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Output RPM:||29||Frame Size:||140|
|Center distance (inch):||3.25||Shaft Seal Material:||Viton|
|Mounting Style:||Base||Input Diameter (in):||0.875 in|
|No. of Gear Reductions:||Single||Product Type:||Right Angle|
|Input Bore (C Face):||0.875||Output shaft:||Shaft|
|Input RPM:||1,750||Gear Drive Reductions:||Single|
|Model Code:||BM832||Output Shaft Assembly Code:||L|
|Input HP:||2.114||Housing material:||Cast Iron|
|Input Keyway (C Face):||3/16 x 3/32|