Grove Gear Cast Iron Single-Reduction Worm Reducer - GRL-BM832-40-L-56
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Reducer Style:||Worm - Right Angle||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Series:||GR Series - Ironman Worm Gear Reducers||Product Type:||Right Angle|
|Model Code:||BM832||Series Style:||GRL-BM-L|
|Gear Type:||Worm||Center distance (inch):||3.25|
|Reducer:||Worm - Right Angle||Ratio:||40:1|
|Housing material:||Cast Iron||Input Style:||C-Face Coupled|
|Mounting Style:||Base||Output Shaft Orientation:||L|
|Input Bore (C Face):||0.625||Output HP:||2.293|
|Input Keyway (C Face):||3/16 x 3/32||Shaft Seal Material:||Viton|
|Output Torque:||3303||Gear Drive Reductions:||Single|
|Output Diameter (in):||1.375 in||Input HP:||2.926|
|Ratio Range:||40:1||Input RPM:||1,750|
|No. of Gear Reductions:||Single||Output Key:||5/16 x 2.63|
|Output shaft:||Shaft||Service Factor:||1|
|Output Shaft Assembly Code:||L||Output RPM:||43|
|Input Diameter (in):||0.625 in||Frame Size:||56|