Grove Gear Cast Iron Single-Reduction Worm Reducer - GRL-BM832-25-L-56
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Product Line:||GR Series - Ironman Worm Gear Reducers||Output Diameter (in):||1.375 in|
|Mounting Style:||Base||Output Style:||L|
|Product Type:||Right Angle||Ratio:||25:1|
|Reducer Style:||Worm - Right Angle||Ratio Range:||25:1|
|Input HP:||4.373||Reducer:||Worm - Right Angle|
|Center distance (inch):||3.25||Housing material:||Cast Iron|
|Input Style:||C-Face Coupled||Output Shaft Assembly Code:||L|
|Output Torque:||3360||Input RPM:||1,750|
|Frame Size:||56||Gear Drive Reductions:||Single|
|Output HP:||3.732||Series:||GR Series - Ironman Worm Gear Reducers|
|Assembly:||BM-L||No. of Gear Reductions:||Single|
|Output Key:||5/16 x 2.63||Output shaft:||Shaft|
|Overhung Load:||2,275||Service Factor:||1|
|Input Diameter (in):||0.625 in||Output RPM:||70|
|Series Style:||GRL-BM-L||Input Keyway (C Face):||3/16 x 3/32|
|Model Code:||BM832||Shaft Seal Material:||Viton|
|Gear Type:||Worm||Output Shaft Orientation:||L|
|Input Bore (C Face):||0.625|