Grove Gear Cast Iron Single-Reduction Worm Reducer - GRL-BM826-10-D-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output HP:||4.097||Output Shaft Assembly Code:||D|
|Center distance (inch):||2.63||Series Style:||GRL-BM-D|
|Model Code:||BM826||Gear Drive Reductions:||Single|
|No. of Gear Reductions:||Single||Reducer:||Worm - Right Angle|
|Series:||GR Series - Ironman Worm Gear Reducers||Housing material:||Cast Iron|
|Output RPM:||175||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Product Type:||Right Angle||Output Shaft Orientation:||D|
|Input Keyway (C Face):||1/4 x 1/8||Output shaft:||Shaft|
|Output Diameter (in):||1.125 in||Output Style:||D|
|Input Diameter (in):||1.125 in||Overhung Load:||1,625|
|Reducer Style:||Worm - Right Angle||Output Torque:||1475|
|Service Factor:||1||Input Style:||C-Face Coupled|
|Input Bore (C Face):||1.125||Ratio Range:||10:1|
|Output Key:||1/4 x 1.75||Assembly:||BM-D|
|Shaft Seal Material:||Viton||Gear Type:||Worm|
|Mounting Style:||Base||Input HP:||4.492|