Grove Gear Cast Iron Single-Reduction Worm Reducer - GRL-HMQ821-50-H1-140-23
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Housing material:||Cast Iron||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Output RPM:||35||Gear Drive Reductions:||Single|
|Frame Size:||140||Input Keyway (C Face):||3/16 x 3/32|
|Output shaft:||Hollow Bore||Output Torque:||970|
|Output Key:||3/8 x 3.00||Reducer Style:||Worm - Right Angle|
|Overhung Load:||1,385||Series Style:||GRL-HMQ-H1|
|Shaft Seal Material:||Viton||Service Factor:||1|
|Output Shaft Orientation:||H1||Ratio Range:||50:1|
|Product Type:||Right Angle||Input Bore (C Face):||0.875|
|Output Hollow Shaft Diameter (in):||1.438 in||Assembly:||HMQ-H1|
|Bore Code:||23||No. of Gear Reductions:||Single|
|Input Style:||C-face Quill||Center distance (inch):||2.06|
|Output HP:||0.539||Gear Type:||Worm|
|Series:||GR Series - Ironman Worm Gear Reducers||Input Diameter (in):||0.875 in|
|Model Code:||HMQ821||Mounting Style:||Shaft Mount|
|Reducer:||Worm - Right Angle||Output Style:||H1|
|Input HP:||0.769||Output Shaft Assembly Code:||H1|