Grove Gear Cast Iron Single-Reduction Worm Reducer - GRL-HMQ821-10-H1-56-19
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Bore Code:||19||Series Code:||GRL|
|Output HP:||2.235||Reducer Style:||Worm - Right Angle|
|Input Style:||C-face Quill||Mounting Style:||Shaft Mount|
|Keyway:||3/16 X 3/32||Output Style:||H1|
|Output Shaft Orientation:||H1||Input HP:||2.464|
|Input RPM:||1,750||Frame Size:||56|
|Output Shaft Assembly Code:||H1||Output Key:||1/4 X 2.5|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Output Torque:||805|
|Output RPM:||175||Series Style:||GRL-HMQ-H1|
|Output shaft:||Hollow Bore||Input Bore (C Face):||0.625|
|Service Factor:||1||Product Type:||Right Angle|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Model Code:||HMQ821|
|Center distance (inch):||2.06||Shaft Seal Material:||Viton|
|Series:||GR Series - Ironman Worm Gear Reducers||No. of Gear Reductions:||Single|
|Ratio Range:||10:1||Input Keyway (C Face):||3/16 x 3/32|
|Gear Drive Reductions:||Single||Input Quill Diameter (in):||0.625 in|
|Housing material:||Cast Iron||Reducer:||Worm - Right Angle|
|Assembly:||HMQ-H1||Output Hollow Shaft Diameter (in):||1.188 in|
|Input Diameter (in):||0.625 in|