Grove Gear Cast Iron Single-Reduction Worm Reducer - GRL-HMQ821-5-H1-56-23
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Style:||C-face Quill||Keyway:||3/16 X 3/32|
|Series Style:||GRL-HMQ-H1||Output HP:||3.41|
|Frame Size:||56||Output Torque:||614|
|Output RPM:||350||Output Style:||H1|
|Mounting Style:||Shaft Mount||Series Code:||GRL|
|Output Shaft Assembly Code:||H1||Overhung Load:||1,200|
|Output Shaft Orientation:||H1||Input RPM:||1,750|
|Bore Code:||23||Reducer Style:||Worm - Right Angle|
|Nominal Motor HP Rating to HP @ 1750 RPM:||3||Output Key:||3/8 x 3.00|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Input HP:||3.653|
|No. of Gear Reductions:||Single||Input Bore (C Face):||0.625|
|Housing material:||Cast Iron||Reducer:||Worm - Right Angle|
|Ratio:||5:1||Shaft Seal Material:||Viton|
|Output Hollow Shaft Diameter (in):||1.438 in||Service Factor:||1|
|Gear Type:||Worm||Model Code:||HMQ821|
|Gear Drive Reductions:||Single||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Input Quill Diameter (in):||0.625 in||Series:||GR Series - Ironman Worm Gear Reducers|
|Output shaft:||Hollow Bore||Input Keyway:||3/16 X 1.38|
|Center distance (inch):||2.06||Input Keyway (C Face):||3/16 x 3/32|
|Product Type:||Right Angle||Motor HP Rating:||3|
|Input Diameter (in):||0.625 in|