Grove Gear Cast Iron Single-Reduction Worm Reducer - GRL-H821-5-H1-23
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Bore Code:||23||Output shaft:||Hollow Bore|
|Output Key:||3/8 x 3.00||Reducer:||Worm - Right Angle|
|Shaft Seal Material:||Viton||Overhung Load:||1,000|
|No. of Gear Reductions:||Single||Assembly:||H-H1|
|Gear Type:||Worm||Series Style:||GRL-H-H1|
|Output Torque:||614||Output Shaft Assembly Code:||H1|
|Input HP:||3.653||Output Shaft Orientation:||H1|
|Service Factor:||1||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Output Hollow Shaft Diameter (in):||1.438 in||Housing material:||Cast Iron|
|Reducer Style:||Worm - Right Angle||Gear Drive Reductions:||Single|
|Product Type:||Right Angle||Output RPM:||350|
|Input Style:||Shaft||Output HP:||3.41|
|Mounting Style:||Shaft Mount||Center distance (inch):||2.06|
|Input Diameter (in):||0.625 in||Model Code:||H821|
|Output Style:||H1||Input Keyway:||3/16 X 1.38|
|Input RPM:||1,750||Ratio Range:||5:1|
|Series:||GR Series - Ironman Worm Gear Reducers||Ratio:||5:1|