Grove Gear Cast Iron Single-Reduction Worm Reducer - GRL-BMQ821-60-D-48
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Model Code:||BMQ821||Input HP:||0.674|
|Reducer:||Worm - Right Angle||Output Shaft Assembly Code:||D|
|Series Style:||GRL-BMQ-D||Reducer Style:||Worm - Right Angle|
|No. of Gear Reductions:||Single||Housing material:||Cast Iron|
|Service Factor:||1||Output HP:||0.435|
|Ratio:||60:1||Input Diameter (in):||0.5 in|
|Output shaft:||Shaft||Ratio Range:||60:1|
|Input RPM:||1,750||Mounting Style:||Base|
|Series:||GR Series - Ironman Worm Gear Reducers||Output RPM:||29|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Frame Size:||48|
|Output Key:||1/4 x 1.44||Gear Drive Reductions:||Single|
|Output Style:||D||Overhung Load:||1,415|
|Output Diameter (in):||1.000 in||Output Torque:||940|
|Shaft Seal Material:||Viton||Output Shaft Orientation:||D|
|Input Bore (C Face):||0.5||Input Style:||C-face Quill|
|Gear Type:||Worm||Input Keyway (C Face):||1/8 x 1/16|
|Product Type:||Right Angle||Center distance (inch):||2.06|