Grove Gear Cast Iron Single-Reduction Worm Reducer - GRL-BMQ821-100-L-48
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Shaft Seal Material:||Viton||Frame Size:||48|
|Output Torque Range:||250 to 500 in lbs||Gear Type:||Worm|
|Product Type:||Right Angle||Center distance (inch):||2.06|
|Output Torque:||439||Mounting Style:||Base|
|Input RPM:||1,750||No. of Gear Reductions:||Single|
|Ratio Range:||100:1 to250:1||Center Distance Range:||1" thru 3.25"|
|Assembly:||BMQ-L||Reducer Style:||Worm - Right Angle|
|Output RPM:||17||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Overhung Load:||1,580||Output HP:||0.122|
|Gear Drive Reductions:||Single||Input Keyway (C Face):||1/8 x 1/16|
|Housing material:||Cast Iron||Ratio:||100:1|
|HP Range:||1/3 HP or Less (< 1/2)||Output shaft:||Shaft|
|Output Shaft Orientation:||L||Output Key:||1/4 x 1.44|
|Input Bore (C Face):||0.5||Output Diameter (in):||1.000 in|
|Model Code:||BMQ821||Input HP:||0.217|
|Series Style:||GRL-BMQ-L||Output Shaft Assembly Code:||L|
|Series:||GR Series - Ironman Worm Gear Reducers||Output Style:||L|
|Service Factor:||1||Input Style:||C-face Quill|
|Input Diameter (in):||0.5 in|