Grove Gear Cast Iron Single-Reduction Worm Reducer - GRL-BMQ821-15-D-140
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series:||GR Series - Ironman Worm Gear Reducers||Gear Type:||Worm|
|Output HP:||1.661||Output Key:||1/4 x 1.44|
|Ratio Range:||15:1||Reducer:||Worm - Right Angle|
|Assembly:||BMQ-D||Output Diameter (in):||1.000 in|
|Output shaft:||Shaft||Input RPM:||1,750|
|Input Keyway (C Face):||3/16 x 3/32||Model Code:||BMQ821|
|Input Diameter (in):||0.875 in||No. of Gear Reductions:||Single|
|Output Shaft Orientation:||D||Output Shaft Assembly Code:||D|
|Series Style:||GRL-BMQ-D||Shaft Seal Material:||Viton|
|Overhung Load:||1,125||Product Type:||Right Angle|
|Center distance (inch):||2.06||Output Torque:||897|
|Input Style:||C-face Quill||Output Style:||D|
|Housing material:||Cast Iron||Input HP:||1.887|
|Mounting Style:||Base||Output RPM:||116|
|Service Factor:||1||Frame Size:||140|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Gear Drive Reductions:||Single|
|Reducer Style:||Worm - Right Angle||Input Bore (C Face):||0.875|