Grove Gear Cast Iron Single-Reduction Worm Reducer - GRL-BMQ821-10-D-140
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Shaft Orientation:||D||Service Factor:||1|
|Output HP:||2.235||Overhung Load:||1,065|
|Output Key:||1/4 x 1.44||Frame Size:||140|
|Input Keyway (C Face):||3/16 x 3/32||Center distance (inch):||2.06|
|Product Type:||Right Angle||Ratio Range:||10:1|
|Series Style:||GRL-BMQ-D||Output Torque:||805|
|Reducer:||Worm - Right Angle||Input RPM:||1,750|
|Gear Drive Reductions:||Single||Output Shaft Assembly Code:||D|
|Gear Type:||Worm||Series:||GR Series - Ironman Worm Gear Reducers|
|Reducer Style:||Worm - Right Angle||Input Style:||C-face Quill|
|No. of Gear Reductions:||Single||Output shaft:||Shaft|
|Housing material:||Cast Iron||Mounting Style:||Base|
|Input Bore (C Face):||0.875||Output Style:||D|
|Output Diameter (in):||1.000 in||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Input Diameter (in):||0.875 in||Output RPM:||175|
|Input HP:||2.464||Shaft Seal Material:||Viton|