Grove Gear Cast Iron Single-Reduction Worm Reducer - GRL-BM821-50-R-56
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Reducer Style:||Worm - Right Angle||Series:||GR Series - Ironman Worm Gear Reducers|
|Product Type:||Right Angle||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Series Style:||GRL-BM-R||Model Code:||BM821|
|Gear Type:||Worm||Center distance (inch):||2.06|
|Reducer:||Worm - Right Angle||Ratio:||50:1|
|Output HP:||0.539||Input HP:||0.769|
|Input RPM:||1,750||Input Bore (C Face):||0.625|
|Output Shaft Assembly Code:||R||Assembly:||BM-R|
|Output shaft:||Shaft||Mounting Style:||Base|
|Output Torque:||970||Gear Drive Reductions:||Single|
|No. of Gear Reductions:||Single||Housing material:||Cast Iron|
|Output RPM:||35||Ratio Range:||50:1|
|Service Factor:||1||Input Keyway (C Face):||3/16 x 3/32|
|Overhung Load:||1,385||Output Key:||1/4 x 1.44|
|Output Diameter (in):||1.000 in||Input Style:||C-Face Coupled|
|Output Style:||R||Shaft Seal Material:||Viton|
|Output Shaft Orientation:||R||Input Diameter (in):||0.625 in|