Grove Gear Cast Iron Single-Reduction Worm Reducer - GRL-BM821-7.5-R-56
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Keyway (C Face):||3/16 x 3/32||Output shaft:||Shaft|
|Series Style:||GRL-BM-R||Input Bore (C Face):||0.625|
|Output Shaft Orientation:||R||Output Diameter (in):||1.000 in|
|Input HP:||2.793||Frame Size:||56|
|Product Type:||Right Angle||Reducer Style:||Worm - Right Angle|
|Output Style:||R||Output Torque:||692|
|Output Shaft Assembly Code:||R||Input RPM:||1,750|
|Housing material:||Cast Iron||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Model Code:||BM821||Output Key:||1/4 x 1.44|
|Gear Type:||Worm||Overhung Load:||1,035|
|Assembly:||BM-R||Center distance (inch):||2.06|
|Output RPM:||233||Gear Drive Reductions:||Single|
|Shaft Seal Material:||Viton||Service Factor:||1|
|Reducer:||Worm - Right Angle||Series:||GR Series - Ironman Worm Gear Reducers|
|Input Diameter (in):||0.625 in||No. of Gear Reductions:||Single|
|Ratio Range:||7.5:1||Input Style:||C-Face Coupled|