Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BM832-7.5-D-210
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Shaft Seal Material:||Viton||Output RPM:||233.3|
|Output HP:||8.264||Series:||GR Series - Ironman Worm Gear Reducers|
|Reducer Style:||Worm - Right Angle||Gear Type:||Worm|
|Model Code:||BM832||Center distance (inch):||3.25|
|Product Type:||Right Angle||Service Factor:||1|
|Output Shaft Orientation:||D||Ratio Range:||7.5:1|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Input Keyway (C Face):||5/16 x 5/32|
|Input Style:||C-Face Coupled||Gear Drive Reductions:||Single|
|Frame Size:||210||Input RPM:||1,750|
|Output shaft:||Shaft||No. of Gear Reductions:||Single|
|Overhung Load:||2,275||Input Bore (C Face):||1.375|
|Output Key:||3/8 x 2.63||Assembly:||BM-D|
|Series Style:||GRG-BM-D||Input Diameter (in):||1.375 in|
|Output Diameter (in):||1.500 in||Output Shaft Assembly Code:||D|
|Output Torque:||2232||Housing material:||Cast Iron|
|Mounting Style:||Base||Input HP:||8.863|
|Reducer:||Worm - Right Angle|