Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BM832-5-R-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Ratio Range:||5:1||Reducer Style:||Worm - Right Angle|
|Mounting Style:||Base||No. of Gear Reductions:||Single|
|Input HP:||11.92||Output Diameter (in):||1.500 in|
|Input RPM:||1,750||Output Key:||3/8 x 2.63|
|Housing material:||Cast Iron||Ratio:||5:1|
|Frame Size:||180||Output Style:||R|
|Series:||GR Series - Ironman Worm Gear Reducers||Output Shaft Assembly Code:||R|
|Output Torque:||2033||Overhung Load:||2,275|
|Output shaft:||Shaft||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Input Bore (C Face):||1.125||Product Type:||Right Angle|
|Input Keyway (C Face):||1/4 x 1/8||Shaft Seal Material:||Viton|
|Input Style:||C-Face Coupled||Center distance (inch):||3.25|
|Output HP:||11.29||Gear Type:||Worm|
|Model Code:||BM832||Input Diameter (in):||1.125 in|
|Service Factor:||1||Reducer:||Worm - Right Angle|
|Output Shaft Orientation:||R||Output RPM:||350|
|Assembly:||BM-R||Gear Drive Reductions:||Single|