Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BMQ832-40-D-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||19.38||Packaged Width:||15.13|
|Output RPM:||43||Input RPM:||1,750|
|Input Style:||C-face Quill||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Frame Size:||180||Mounting Style:||Base|
|Output HP:||2.293||Output Shaft Orientation:||D|
|Input HP:||2.926||Keyway:||1/4 X 1/8|
|Output Style:||D||Output Shaft Assembly Code:||D|
|Series Code:||GRG||Output Key:||3/8 X 2.63|
|Overhung Load:||2,275||Output Torque:||3303|
|Series Style:||GRG-BMQ-D||No. of Gear Reductions:||Single|
|Reducer Style:||Worm - Right Angle||Output shaft:||Shaft|
|Gear Type:||Worm||Output Diameter (in):||1.500 in|
|Ratio:||40:1||Center distance (inch):||3.25|
|Input Quill Diameter (in):||1.125 in||Product Type:||Right Angle|
|Reducer:||Worm - Right Angle||Input Bore (C Face):||1.125|
|Shaft Seal Material:||Viton||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Input Keyway (C Face):||1/4 x 1/8||Housing material:||Cast Iron|
|Series:||GR Series - Ironman Worm Gear Reducers||Assembly:||BMQ-D|
|Service Factor:||1||Gear Drive Reductions:||Single|
|Ratio Range:||40:1||Model Code:||BMQ832|
|Input Diameter (in):||1.125 in|