Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BMQ832-60-L-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Style:||C-face Quill||Output Diameter (in):||1.500 in|
|Series:||GR Series - Ironman Worm Gear Reducers||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Output RPM:||29||Frame Size:||180|
|Input HP:||2.114||Model Code:||BMQ832|
|Ratio Range:||60:1||Gear Type:||Worm|
|Input Keyway (C Face):||1/4 x 1/8||Shaft Seal Material:||Viton|
|Center distance (inch):||3.25||Product Type:||Right Angle|
|Input RPM:||1,750||Output Key:||3/8 x 2.63|
|Output Style:||L||Reducer:||Worm - Right Angle|
|Output Torque:||3274||Input Bore (C Face):||1.125|
|Housing material:||Cast Iron||Output shaft:||Shaft|
|Reducer Style:||Worm - Right Angle||Input Diameter (in):||1.125 in|
|Series Style:||GRG-BMQ-L||No. of Gear Reductions:||Single|
|Overhung Load:||2,275||Service Factor:||1|
|Assembly:||BMQ-L||Gear Drive Reductions:||Single|
|Output Shaft Assembly Code:||L||Output HP:||1.515|
|Output Shaft Orientation:||L|