Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BMQ832-50-D-140
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|No. of Gear Reductions:||Single||Input HP:||2.462|
|Input Bore (C Face):||0.875||Output Style:||D|
|Ratio Range:||50:1||Shaft Seal Material:||Viton|
|Mounting Style:||Base||Frame Size:||140|
|Service Factor:||1||Overhung Load:||2,170|
|Ratio:||50:1||Gear Drive Reductions:||Single|
|Output Torque:||3315||Output HP:||1.841|
|Output Diameter (in):||1.500 in||Input Diameter (in):||0.875 in|
|Output Key:||3/8 x 2.63||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Center distance (inch):||3.25||Reducer:||Worm - Right Angle|
|Model Code:||BMQ832||Input RPM:||1,750|
|Gear Type:||Worm||Reducer Style:||Worm - Right Angle|
|Input Keyway (C Face):||3/16 x 3/32||Input Style:||C-face Quill|
|Product Type:||Right Angle||Housing material:||Cast Iron|
|Series Style:||GRG-BMQ-D||Series:||GR Series - Ironman Worm Gear Reducers|
|Assembly:||BMQ-D||Output Shaft Assembly Code:||D|
|Output RPM:||35||Output Shaft Orientation:||D|