Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BMQ832-20-D-140
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Bore (C Face):||0.875||Gear Drive Reductions:||Single|
|Product Type:||Right Angle||Series Style:||GRG-BMQ-D|
|No. of Gear Reductions:||Single||Input Diameter (in):||0.875 in|
|Output RPM:||87||Reducer Style:||Worm - Right Angle|
|Model Code:||BMQ832||Mounting Style:||Base|
|Output HP:||4.536||Input RPM:||1,750|
|Housing material:||Cast Iron||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Input Keyway (C Face):||3/16 x 3/32||Assembly:||BMQ-D|
|Series:||GR Series - Ironman Worm Gear Reducers||Reducer:||Worm - Right Angle|
|Frame Size:||140||Input Style:||C-face Quill|
|Output Torque:||3267||Ratio Range:||20:1|
|Shaft Seal Material:||Viton||Output shaft:||Shaft|
|Output Style:||D||Input HP:||5.18|
|Center distance (inch):||3.25||Service Factor:||1|
|Output Shaft Assembly Code:||D||Output Shaft Orientation:||D|
|Output Key:||3/8 x 2.63||Gear Type:||Worm|
|Output Diameter (in):||1.500 in|