Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BMQ832-10-D-56--
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Reducer:||Worm - Right Angle||Model Code:||BMQ832|
|Center distance (inch):||3.25||Reducer Style:||Worm - Right Angle|
|Output HP:||7.497||Service Factor:||1|
|Output Diameter (in):||1.500 in||Series:||GR Series - Ironman Worm Gear Reducers|
|Mounting Style:||Base||Gear Type:||Worm|
|Output Key:||3/8 x 2.63||Ratio Range:||10:1|
|Output Shaft Orientation:||D||Housing material:||Cast Iron|
|Overhung Load:||2,170||Product Line:||GR Series - Ironman Worm Gear Reducers|
|No. of Gear Reductions:||Single||Frame Size:||56|
|Series Style:||GRG-BMQ-D||Input Style:||C-face Quill|
|Ratio:||10:1||Gear Drive Reductions:||Single|
|Product Type:||Right Angle||Output RPM:||175|
|Output Shaft Assembly Code:||D||Input Keyway (C Face):||3/16 x 3/32|
|Output Torque:||2700||Input HP:||8.092|
|Output Style:||D||Output shaft:||Shaft|
|Input Diameter (in):||0.625 in||Input Bore (C Face):||0.625|
|Shaft Seal Material:||Viton|