Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BM832-25-D-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Mounting Style:||Base||Output Diameter (in):||1.500 in|
|Series:||GR Series - Ironman Worm Gear Reducers||Output Torque:||3360|
|Housing material:||Cast Iron||Input Style:||C-Face Coupled|
|Input RPM:||1,750||Shaft Seal Material:||Viton|
|Reducer:||Worm - Right Angle||Assembly:||BM-D|
|Center distance (inch):||3.25||Ratio Range:||25:1|
|Output HP:||3.732||Output shaft:||Shaft|
|Input Keyway (C Face):||1/4 x 1/8||Frame Size:||180|
|Output Shaft Orientation:||D||Input HP:||4.373|
|Output Shaft Assembly Code:||D||No. of Gear Reductions:||Single|
|Gear Drive Reductions:||Single||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Series Style:||GRG-BM-D||Input Bore (C Face):||1.125|
|Product Type:||Right Angle||Output Style:||D|
|Input Diameter (in):||1.125 in||Output RPM:||70|
|Overhung Load:||2,275||Output Key:||3/8 x 2.63|
|Reducer Style:||Worm - Right Angle||Service Factor:||1|