Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BM832-15-L-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Diameter (in):||1.500 in||Product Type:||Right Angle|
|Output HP:||5.516||Gear Drive Reductions:||Single|
|Series Style:||GRG-BM-L||Output Key:||3/8 x 2.63|
|Model Code:||BM832||Ratio Range:||15:1|
|Service Factor:||1||Mounting Style:||Base|
|Ratio:||15:1||Input Diameter (in):||1.125 in|
|Series:||GR Series - Ironman Worm Gear Reducers||Input Keyway (C Face):||1/4 x 1/8|
|Reducer:||Worm - Right Angle||Shaft Seal Material:||Viton|
|Output Style:||L||Frame Size:||180|
|Gear Type:||Worm||Input RPM:||1,750|
|Output shaft:||Shaft||Housing material:||Cast Iron|
|Assembly:||BM-L||Output Shaft Assembly Code:||L|
|Input Bore (C Face):||1.125||No. of Gear Reductions:||Single|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Output RPM:||116|
|Reducer Style:||Worm - Right Angle||Center distance (inch):||3.25|
|Input HP:||6.127||Overhung Load:||2,170|
|Output Torque:||2980||Output Shaft Orientation:||L|
|Input Style:||C-Face Coupled|