Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BM832-40-D-140
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series:||GR Series - Ironman Worm Gear Reducers||Ratio Range:||40:1|
|Output Torque:||3303||Input Bore (C Face):||0.875|
|Reducer Style:||Worm - Right Angle||Output RPM:||43|
|Gear Drive Reductions:||Single||Series Style:||GRG-BM-D|
|Input RPM:||1,750||Output Shaft Assembly Code:||D|
|Reducer:||Worm - Right Angle||Model Code:||BM832|
|Output Key:||3/8 x 2.63||Input HP:||2.926|
|Frame Size:||140||Center distance (inch):||3.25|
|Mounting Style:||Base||Output Style:||D|
|No. of Gear Reductions:||Single||Housing material:||Cast Iron|
|Overhung Load:||2,275||Gear Type:||Worm|
|Input Diameter (in):||0.875 in||Input Keyway (C Face):||3/16 x 3/32|
|Assembly:||BM-D||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Service Factor:||1||Input Style:||C-Face Coupled|
|Product Type:||Right Angle||Shaft Seal Material:||Viton|
|Output HP:||2.293||Output Diameter (in):||1.500 in|
|Output Shaft Orientation:||D|