Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BM832-10-R-56
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Mounting Style:||Base||Output Shaft Orientation:||R|
|Assembly:||BM-R||Center distance (inch):||3.25|
|Reducer Style:||Worm - Right Angle||Ratio:||10:1|
|Input Style:||C-Face Coupled||Output Torque:||2700|
|Series Style:||GRG-BM-R||Overhung Load:||2,170|
|Output Diameter (in):||1.500 in||Shaft Seal Material:||Viton|
|Input RPM:||1,750||Output HP:||7.497|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Output Key:||3/8 x 2.63|
|Output Shaft Assembly Code:||R||Output Style:||R|
|Housing material:||Cast Iron||Input HP:||8.092|
|Series:||GR Series - Ironman Worm Gear Reducers||Ratio Range:||10:1|
|No. of Gear Reductions:||Single||Input Bore (C Face):||0.625|
|Product Type:||Right Angle||Input Keyway (C Face):||3/16 x 3/32|
|Output RPM:||175||Output shaft:||Shaft|
|Service Factor:||1||Input Diameter (in):||0.625 in|
|Reducer:||Worm - Right Angle||Model Code:||BM832|
|Gear Drive Reductions:||Single||Gear Type:||Worm|