Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BM832-10-L-56
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Shaft Assembly Code:||L||Output Shaft Orientation:||L|
|Input Keyway (C Face):||3/16 x 3/32||Housing material:||Cast Iron|
|Gear Type:||Worm||Gear Drive Reductions:||Single|
|Mounting Style:||Base||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Output Key:||3/8 x 2.63||Output RPM:||175|
|Output Diameter (in):||1.500 in||Ratio:||10:1|
|Input Style:||C-Face Coupled||Frame Size:||56|
|No. of Gear Reductions:||Single||Input HP:||8.092|
|Reducer Style:||Worm - Right Angle||Series:||GR Series - Ironman Worm Gear Reducers|
|Service Factor:||1||Input Bore (C Face):||0.625|
|Center distance (inch):||3.25||Reducer:||Worm - Right Angle|
|Output Style:||L||Model Code:||BM832|
|Series Style:||GRG-BM-L||Output shaft:||Shaft|
|Ratio Range:||10:1||Overhung Load:||2,170|
|Shaft Seal Material:||Viton||Product Type:||Right Angle|
|Output HP:||7.497||Input RPM:||1,750|
|Input Diameter (in):||0.625 in|