Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-B832-10-D
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||19.38||Packaged Width:||15.13|
|Input RPM:||1,750||Output Shaft Assembly Code:||D|
|Output Torque:||2700||Series Style:||GRG-B-D|
|Output Style:||D||Reducer Style:||Worm - Right Angle|
|Input HP:||8.092||Overhung Load:||2,275|
|Mounting Style:||Base||Output RPM:||175|
|No. of Gear Reductions:||Single||Series Code:||GRG|
|Input Style:||Shaft||Output Key:||3/8 X 2.63|
|Output Shaft Orientation:||D||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output HP:||7.497||Product Type:||Right Angle|
|Gear Drive Reductions:||Single||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Shaft Seal Material:||Viton||Reducer:||Worm - Right Angle|
|Service Factor:||1||Output shaft:||Shaft|
|Model Code:||B832||Housing material:||Cast Iron|
|Gear Type:||Worm||Ratio Range:||10:1|
|Output Diameter (in):||1.500 in||Assembly:||B-D|
|Ratio:||10:1||Center distance (inch):||3.25|
|Input Keyway:||3/16 X 1.63||Input Diameter (in):||0.875 in|
|Series:||GR Series - Ironman Worm Gear Reducers|