Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-B832-60-R
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||19.38||Packaged Width:||15.13|
|Output Shaft Orientation:||R||Output HP:||1.515|
|Mounting Style:||Base||Input HP:||2.114|
|Output RPM:||29||Output Torque:||3274|
|Reducer Style:||Worm - Right Angle||Overhung Load:||2,275|
|Output Style:||R||Input Style:||Shaft|
|Series Code:||GRG||Input RPM:||1,750|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Output Shaft Assembly Code:||R|
|Series Style:||GRG-B-R||No. of Gear Reductions:||Single|
|Output Key:||3/8 X 2.63||Output shaft:||Shaft|
|Reducer:||Worm - Right Angle||Shaft Seal Material:||Viton|
|Service Factor:||1||Input Diameter (in):||0.875 in|
|Product Type:||Right Angle||Gear Drive Reductions:||Single|
|Center distance (inch):||3.25||Housing material:||Cast Iron|
|Output Diameter (in):||1.500 in||Series:||GR Series - Ironman Worm Gear Reducers|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Input Keyway:||3/16 X 1.63|