Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BMQ826-10-R-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||16||Packaged Width:||12.25|
|Input RPM:||1,750||No. of Gear Reductions:||Single|
|Output Shaft Assembly Code:||R||Output RPM:||175|
|Output Style:||R||Output Key:||1/4 X 1.75|
|Keyway:||1/4 X 1/8||Mounting Style:||Base|
|Input HP:||4.492||Output HP:||4.097|
|Output Shaft Orientation:||R||Frame Size:||180|
|Overhung Load:||1,625||Output Torque:||1475|
|Series Code:||GRG||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Series Style:||GRG-BMQ-R||Reducer Style:||Worm - Right Angle|
|Input Style:||C-face Quill||Ratio:||10:1|
|Reducer:||Worm - Right Angle||Series:||GR Series - Ironman Worm Gear Reducers|
|Output shaft:||Shaft||Input Bore (C Face):||1.125|
|Output Diameter (in):||1.250 in||Service Factor:||1|
|Input Diameter (in):||1.125 in||Input Keyway (C Face):||1/4 x 1/8|
|Model Code:||BMQ826||Ratio Range:||10:1|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Input Quill Diameter (in):||1.125 in|
|Gear Type:||Worm||Housing material:||Cast Iron|
|Shaft Seal Material:||Viton||Center distance (inch):||2.63|
|Product Type:||Right Angle||Assembly:||BMQ-R|
|Gear Drive Reductions:||Single|