Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BMQ826-5-R-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||16||Packaged Width:||12.25|
|Mounting Style:||Base||Output Shaft Assembly Code:||R|
|Input RPM:||1,750||Input HP:||6.693|
|Output RPM:||350||Frame Size:||180|
|Input Style:||C-face Quill||Output Key:||1/4 X 1.75|
|Nominal Motor HP Rating to HP @ 1750 RPM:||5||Overhung Load:||1,625|
|Series Style:||GRG-BMQ-R||Output Shaft Orientation:||R|
|Reducer Style:||Worm - Right Angle||Series Code:||GRG|
|Output Style:||R||No. of Gear Reductions:||Single|
|Keyway:||1/4 x 1/8||Output Torque:||1130|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Output HP:||6.276|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Gear Drive Reductions:||Single|
|Output shaft:||Shaft||Input Keyway:||3/16 X 1.63|
|Input Diameter (in):||1.125 in||Ratio:||5:1|
|Product Type:||Right Angle||Series:||GR Series - Ironman Worm Gear Reducers|
|Model Code:||BMQ826||Ratio Range:||5:1|
|Gear Type:||Worm||Reducer:||Worm - Right Angle|
|Shaft Seal Material:||Viton||Service Factor:||1|
|Input Quill Diameter (in):||1.125 in||Housing material:||Cast Iron|
|Assembly:||BMQ-R||Input Bore (C Face):||1.125|
|Motor HP Rating:||5||Output Diameter (in):||1.250 in|
|Input Keyway (C Face):||1/4 x 1/8||Center distance (inch):||2.63|