Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BMQ826-10-D-140

Catalog #:GRG-BMQ826-10-D-140
Part #:GRG8260207.00
  • One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
  • Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
  • Large oil capacity provides positive splash lubrication and superior cooling capability.
  • Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
  • The unique quill seal guard protects the input seal from damage during motor installation.
  • Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
  • Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
  • All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
  • Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
  • Mounting dimensions are interchangeable with most industry standard reducers.
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
Weight:56.00 LB
UOM:EA
List Price: $1,311.00

General Specifications

UPC: 69031004251 Weight: 56.00 LB
Packaged Length: 16 Inches Packaged Width: 12.25 Inches
Packaged Height: 11.75 Inches

Technical Specifications

No. of Gear Reductions: Single Output RPM: 175
Series Code: GRG Input HP: 4.492
Output Shaft Assembly Code: D Series Type: Cast Iron 800 Worm Gear Reducers
Series Style: GRG-BMQ-D Frame Size: 140
Output Torque: 1475 Output HP: 4.097
Keyway: 3/16 X 3/32 Output Style: D
Overhung Load: 1,625 Reducer Style: Worm - Right Angle
Output Shaft Orientation: D Output Key: 1/4 X 1.75
Mounting Style: No Base Input RPM: 1,750
Input Style: C-face Quill Housing material: Cast Iron
Gear Drive Reductions: Single Input Diameter (in): 0.875 in
Output Diameter (in): 1.250 in Assembly: BMQ-D
Gear Type: Worm Input Bore (C Face): 0.875
Input Quill Diameter (in): 0.875 in Center distance (inch): 2.63
Ratio Range: 10:1 Product Type: Right Angle
Model Code: BMQ826 Reducer: Worm - Right Angle
Input Keyway (C Face): 3/16 x 3/32 Series: GR Series - Ironman Worm Gear Reducers
Service Factor: 1 Product Line: GR Series - Ironman Worm Gear Reducers
Output shaft: Shaft Ratio: 10:1
Shaft Seal Material: Viton Output Direction: LR
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.