Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BM826-15-R-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Keyway (C Face):||1/4 x 1/8||Ratio:||15:1|
|Overhung Load:||1,625||Output Torque:||1737|
|No. of Gear Reductions:||Single||Reducer:||Worm - Right Angle|
|Output Key:||1/4 x 1.75||Shaft Seal Material:||Viton|
|Input Diameter (in):||1.125 in||Service Factor:||1|
|Center distance (inch):||2.63||Gear Drive Reductions:||Single|
|Input HP:||3.614||Housing material:||Cast Iron|
|Series Style:||GRG-BM-R||Series:||GR Series - Ironman Worm Gear Reducers|
|Product Type:||Right Angle||Model Code:||BM826|
|Reducer Style:||Worm - Right Angle||Gear Type:||Worm|
|Output shaft:||Shaft||Output Shaft Assembly Code:||R|
|Output RPM:||116||Input Bore (C Face):||1.125|
|Ratio Range:||15:1||Frame Size:||180|
|Output Shaft Orientation:||R||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Mounting Style:||Base||Output Diameter (in):||1.250 in|
|Output HP:||3.216||Output Style:||R|
|Input Style:||C-Face Coupled|