Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-B826-25-D
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||16||Packaged Width:||12.25|
|Input HP:||2.487||Overhung Load:||1,625|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Output Shaft Assembly Code:||D|
|No. of Gear Reductions:||Single||Output RPM:||70|
|Output Key:||1/4 X 1.75||Reducer Style:||Worm - Right Angle|
|Output HP:||2.076||Series Style:||GRG-B-D|
|Output Torque:||1869||Output Style:||D|
|Input RPM:||1,750||Input Style:||Shaft|
|Series Code:||GRG||Mounting Style:||Base|
|Output Shaft Orientation:||D||Assembly:||B-D|
|Gear Drive Reductions:||Single||Housing material:||Cast Iron|
|Center distance (inch):||2.63||Shaft Seal Material:||Viton|
|Output Diameter (in):||1.250 in||Output shaft:||Shaft|
|Ratio:||25:1||Input Diameter (in):||0.75 in|
|Service Factor:||1||Input Keyway:||3/16 x 1.63|
|Series:||GR Series - Ironman Worm Gear Reducers||Model Code:||B826|
|Reducer:||Worm - Right Angle||Ratio Range:||25:1|
|Product Type:||Right Angle||Gear Type:||Worm|
|Product Line:||GR Series - Ironman Worm Gear Reducers|