Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-B826-80-L
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||16 Inches||Packaged Width:||12.25 Inches|
|Packaged Height:||11.75 Inches|
|No. of Gear Reductions:||Single||Output Key:||1/4 X 1.75|
|Overhung Load:||1,625||Output HP:||0.379|
|Output RPM:||21.9||Output Style:||L|
|Output Shaft Assembly Code:||L||Series Code:||GRG|
|Output Shaft Orientation:||L||Series Style:||GRG-B-L|
|Input RPM:||1,750||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Reducer Style:||Worm - Right Angle||Output Torque:||1092|
|Mounting Style:||Base||Input HP:||0.577|
|Input Style:||Shaft||Gear Drive Reductions:||Single|
|Output shaft:||Shaft||Gear Type:||Worm|
|Ratio Range:||80:1||Series:||GR Series - Ironman Worm Gear Reducers|
|Product Type:||Right Angle||Model Code:||B826|
|Housing material:||Cast Iron||Assembly:||B-L|
|Ratio:||80:1||Reducer:||Worm - Right Angle|
|Input Diameter (in):||0.75 in||Output Diameter (in):||1.250 in|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Service Factor:||1|
|Input Keyway:||3/16 x 1.63||Shaft Seal Material:||Viton|
|Center distance (inch):||2.63|