Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-B826-20-L
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||16 Inches||Packaged Width:||12.25 Inches|
|Packaged Height:||11.75 Inches|
|Input HP:||2.965||Series Code:||GRG|
|Output RPM:||87||Output Torque:||1836|
|Output HP:||2.549||Overhung Load:||1,625|
|Output Shaft Assembly Code:||L||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Input RPM:||1,750||No. of Gear Reductions:||Single|
|Output Shaft Orientation:||L||Series Style:||GRG-B-L|
|Mounting Style:||Base||Input Style:||Shaft|
|Output Key:||1/4 X 1.75||Output Style:||L|
|Reducer Style:||Worm - Right Angle||Ratio Range:||20:1|
|Center distance (inch):||2.63||Gear Type:||Worm|
|Assembly:||B-L||Input Diameter (in):||0.75 in|
|Shaft Seal Material:||Viton||Service Factor:||1|
|Ratio:||20:1||Output Diameter (in):||1.250 in|
|Housing material:||Cast Iron||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Series:||GR Series - Ironman Worm Gear Reducers||Output shaft:||Shaft|
|Product Type:||Right Angle||Gear Drive Reductions:||Single|
|Model Code:||B826||Reducer:||Worm - Right Angle|
|Input Keyway:||3/16 x 1.63|