Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-HMQ821-50-H1-140-23
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Reducer:||Worm - Right Angle||Bore Code:||23|
|Output Style:||H1||Output Torque:||970|
|Input RPM:||1,750||Output HP:||0.539|
|Input Bore (C Face):||0.875||Housing material:||Cast Iron|
|Center distance (inch):||2.06||Product Type:||Right Angle|
|Input Style:||C-face Quill||No. of Gear Reductions:||Single|
|Overhung Load:||1,385||Mounting Style:||Shaft Mount|
|Input HP:||0.769||Gear Drive Reductions:||Single|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Output shaft:||Hollow Bore|
|Output Shaft Orientation:||H1||Output RPM:||35|
|Frame Size:||140||Reducer Style:||Worm - Right Angle|
|Input Keyway (C Face):||3/16 x 3/32||Series Style:||GRG-HMQ-H1|
|Output Key:||3/8 x 3.00||Output Shaft Assembly Code:||H1|
|Service Factor:||1||Model Code:||HMQ821|
|Series:||GR Series - Ironman Worm Gear Reducers||Shaft Seal Material:||Viton|
|Output Hollow Shaft Diameter (in):||1.438 in||Input Diameter (in):||0.875 in|