Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-HMQ821-25-H1-140-23
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Frame Size:||140||Output RPM:||70|
|Output Shaft Assembly Code:||H1||Output Torque:||985|
|Series Style:||GRG-HMQ-H1||Series Code:||GRG|
|Reducer Style:||Worm - Right Angle||Input Style:||C-face Quill|
|Input HP:||1.333||Input RPM:||1,750|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Output Shaft Orientation:||H1|
|Output Style:||H1||Output HP:||1.094|
|Output Key:||3/8 x 3.00||Bore Code:||23|
|Mounting Style:||Shaft Mount||Keyway:||3/16 X 3/32|
|Service Factor:||1||Series:||GR Series - Ironman Worm Gear Reducers|
|Ratio Range:||25:1||Output Hollow Shaft Diameter (in):||1.438 in|
|Input Bore (C Face):||0.875||Housing material:||Cast Iron|
|Gear Drive Reductions:||Single||Input Keyway (C Face):||3/16 x 3/32|
|Product Type:||Right Angle||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Center distance (inch):||2.06||Shaft Seal Material:||Viton|
|Input Quill Diameter (in):||0.875 in||Gear Type:||Worm|
|Assembly:||HMQ-H1||No. of Gear Reductions:||Single|
|Output shaft:||Hollow Bore||Reducer:||Worm - Right Angle|
|Input Diameter (in):||0.875 in|