Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-HMQ821-25-H1-140-20
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Frame Size:||140||Mounting Style:||Shaft Mount|
|Series Code:||GRG||Output HP:||1.094|
|Reducer Style:||Worm - Right Angle||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output Shaft Assembly Code:||H1||Output RPM:||70|
|Input Style:||C-face Quill||Output Torque:||985|
|Series Style:||GRG-HMQ-H1||Output Shaft Orientation:||H1|
|Bore Code:||20||Keyway:||3/16 X 3/32|
|Output Style:||H1||Output Key:||1/4 X 2.50|
|Input RPM:||1,750||Input HP:||1.333|
|Product Type:||Right Angle||Series:||GR Series - Ironman Worm Gear Reducers|
|Input Bore (C Face):||0.875||Center distance (inch):||2.06|
|Shaft Seal Material:||Viton||Housing material:||Cast Iron|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Output shaft:||Hollow Bore|
|Input Diameter (in):||0.875 in||Input Quill Diameter (in):||0.875 in|
|Model Code:||HMQ821||Output Hollow Shaft Diameter (in):||1.250 in|
|Service Factor:||1||Ratio Range:||25:1|
|Ratio:||25:1||No. of Gear Reductions:||Single|
|Gear Type:||Worm||Reducer:||Worm - Right Angle|
|Gear Drive Reductions:||Single||Input Keyway (C Face):||3/16 x 3/32|