Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-HMQ821-100-H1-56-16
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Reducer Style:||Worm - Right Angle||Output RPM:||17|
|Output Shaft Assembly Code:||H1||Input HP:||0.217|
|Bore Code:||16||Series Code:||GRG|
|Input Style:||C-face Quill||Output HP:||0.122|
|Keyway:||3/16 X 3/32||Output Style:||H1|
|Frame Size:||56||Output Shaft Orientation:||H1|
|Input RPM:||1,750||Output Key:||1/4 X 2.50|
|Output Torque:||439||Mounting Style:||Shaft Mount|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Series Style:||GRG-HMQ-H1|
|Ratio:||100:1||Input Bore (C Face):||0.625|
|Assembly:||HMQ-H1||Ratio Range:||100:1 to 250:1|
|Product Type:||Right Angle||Output Hollow Shaft Diameter (in):||1.000 in|
|Gear Drive Reductions:||Single||Input Keyway (C Face):||3/16 x 3/32|
|Input Quill Diameter (in):||0.625 in||Product Line:||GR Series - Ironman Worm Gear Reducers|
|No. of Gear Reductions:||Single||Output shaft:||Hollow Bore|
|Service Factor:||1||Series:||GR Series - Ironman Worm Gear Reducers|
|Center distance (inch):||2.06||Gear Type:||Worm|
|Model Code:||HMQ821||Input Diameter (in):||0.625 in|
|Reducer:||Worm - Right Angle||Housing material:||Cast Iron|
|Shaft Seal Material:||Viton|