Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-HM821-100-H1-56-16
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Bore Code:||16||Series Style:||GRG-HM-H1|
|Service Factor:||1||Input Diameter (in):||0.625 in|
|Model Code:||HM821||Input HP:||0.217|
|Output Style:||H1||Reducer Style:||Worm - Right Angle|
|Output Shaft Orientation:||H1||Input Style:||C-Face Coupled|
|Input Bore (C Face):||0.625||Reducer:||Worm - Right Angle|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Frame Size:||56|
|Ratio:||100:1||Input Keyway (C Face):||3/16 x 3/32|
|Shaft Seal Material:||Viton||Output Shaft Assembly Code:||H1|
|Overhung Load:||1,580||Input RPM:||1,750|
|Output Key:||1/4 X 2.50||Assembly:||HM-H1|
|Series:||GR Series - Ironman Worm Gear Reducers||Housing material:||Cast Iron|
|Output RPM:||17||Output Torque:||439|
|Product Type:||Right Angle||Mounting Style:||Shaft Mount|
|Center distance (inch):||2.06||Gear Drive Reductions:||Single|
|Gear Type:||Worm||Output Hollow Shaft Diameter (in):||1.000 in|
|No. of Gear Reductions:||Single||Output HP:||0.122|
|Ratio Range:||100:1 to 250:1||Output shaft:||Hollow Bore|