Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-HM821-60-H1-56-18
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Gear Type:||Worm||Series:||GR Series - Ironman Worm Gear Reducers|
|Ratio:||60:1||Output Key:||1/4 x 3.00|
|Gear Drive Reductions:||Single||Output Style:||H1|
|Output shaft:||Hollow Bore||Reducer:||Worm - Right Angle|
|Output HP:||0.435||Output Hollow Shaft Diameter (in):||1.125 in|
|Input Diameter (in):||0.625 in||Model Code:||HM821|
|Input Style:||C-Face Coupled||Bore Code:||18|
|No. of Gear Reductions:||Single||Service Factor:||1|
|Output Torque:||940||Input Bore (C Face):||0.625|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Overhung Load:||1,415|
|Shaft Seal Material:||Viton||Series Style:||GRG-HM-H1|
|Output Shaft Assembly Code:||H1||Center distance (inch):||2.06|
|Assembly:||HM-H1||Reducer Style:||Worm - Right Angle|
|Frame Size:||56||Housing material:||Cast Iron|
|Input Keyway (C Face):||3/16 x 3/32||Mounting Style:||Shaft Mount|
|Input HP:||0.674||Input RPM:||1,750|
|Ratio Range:||60:1||Output Shaft Orientation:||H1|
|Output RPM:||29||Product Type:||Right Angle|