Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-HM821-50-H1-56-20
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Shaft Assembly Code:||H1||Output Style:||H1|
|Output RPM:||35||Series Style:||GRG-HM-H1|
|Frame Size:||56||Bore Code:||20|
|Output Shaft Orientation:||H1||Output HP:||0.539|
|Input RPM:||1,750||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output Key:||1/4 X 2.50||Input HP:||0.769|
|Overhung Load:||1,200||Output Torque:||970|
|Input Style:||C-Face Coupled||Reducer Style:||Worm - Right Angle|
|Mounting Style:||Shaft Mount||Series Code:||GRG|
|Assembly:||HM-H1||Center distance (inch):||2.06|
|Motor HP Rating:||0.75||Reducer:||Worm - Right Angle|
|Output Hollow Shaft Diameter (in):||1.250 in||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Ratio Range:||50:1||Input Keyway:||3/16 X 1.38|
|Series:||GR Series - Ironman Worm Gear Reducers||Model Code:||HM821|
|Gear Drive Reductions:||Single||Input Bore (C Face):||0.625|
|Product Type:||Right Angle||Input Keyway (C Face):||3/16 x 3/32|
|Output shaft:||Hollow Bore||No. of Gear Reductions:||Single|
|Input Diameter (in):||0.625 in||Housing material:||Cast Iron|
|Service Factor:||1||Shaft Seal Material:||Viton|