Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-HM821-5-H1-56-16
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Torque:||614||Output RPM:||350|
|Output HP:||3.41||Series Style:||GRG-HM-H1|
|Housing material:||Cast Iron||Overhung Load:||1,000|
|Model Code:||HM821||Output Shaft Assembly Code:||H1|
|Ratio Range:||5:1||Input Diameter (in):||0.625 in|
|Output Hollow Shaft Diameter (in):||1.000 in||Bore Code:||16|
|Service Factor:||1||Input Bore (C Face):||0.625|
|Gear Type:||Worm||Gear Drive Reductions:||Single|
|Input Style:||C-Face Coupled||Assembly:||HM-H1|
|Frame Size:||56||Shaft Seal Material:||Viton|
|Reducer Style:||Worm - Right Angle||No. of Gear Reductions:||Single|
|Input Keyway (C Face):||3/16 x 3/32||Product Type:||Right Angle|
|Series:||GR Series - Ironman Worm Gear Reducers||Input HP:||3.653|
|Output shaft:||Hollow Bore||Center distance (inch):||2.06|
|Output Key:||1/4 X 2.50||Ratio:||5:1|
|Output Shaft Orientation:||H1||Mounting Style:||Shaft Mount|
|Output Style:||H1||Reducer:||Worm - Right Angle|
|Input RPM:||1,750||Product Line:||GR Series - Ironman Worm Gear Reducers|