Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-H821-100-H1-20
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Reducer Style:||Worm - Right Angle||Output HP:||0.122|
|Ratio:||100:1||Output Shaft Assembly Code:||H1|
|Product Type:||Right Angle||Bore Code:||20|
|Output Key:||1/4 X 2.50||Shaft Seal Material:||Viton|
|Input Diameter (in):||0.625 in||Series:||GR Series - Ironman Worm Gear Reducers|
|Output Torque:||439||No. of Gear Reductions:||Single|
|Housing material:||Cast Iron||Service Factor:||1|
|Input Style:||Shaft||Model Code:||H821|
|Input HP:||0.217||Reducer:||Worm - Right Angle|
|Center distance (inch):||2.06||Overhung Load:||1,580|
|Output shaft:||Hollow Bore||Assembly:||H-H1|
|Input Keyway:||3/16 X 1.38||Output Shaft Orientation:||H1|
|Output Hollow Shaft Diameter (in):||1.250 in||Series Style:||GRG-H-H1|
|Gear Drive Reductions:||Single||Mounting Style:||Shaft Mount|
|Input RPM:||1,750||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Ratio Range:||100:1 to 250:1||Gear Type:||Worm|
|Output RPM:||17||Output Style:||H1|